Toshiba MJ-1104, MJ-1103 service manual Buffer roller, Front buffer roller guide

(8)Remove 1 E-ring. Then remove the shaft and the spring to take off the tapping arm.

Note:

Install the tapping arm as shown in the fig- ure.

(9)Move the buffer guide to both ends by push- ing the buffer roller.

(10)Remove the spring and 2 E-rings. Then take off the front buffer roller guide.

Tapping arm

Spring

Shaft

Fig. 4-150

Buffer guide

Buffer roller

Fig. 4-151

Front buffer roller guide

Spring

Fig. 4-152

MJ-1103/1104	© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND INSTALLATION

4 - 54