Toshiba MJ-1103 Paper exiting operation, Stack transport roller-2 Paper exit belt, Clutch

[E] Paper exiting operation

Bundles of the paper aligned or stapled on the finishing tray are then pulled up by the paper exit guide driven by the stack transport motor (M8) with the turning ON of the paper exit guide clutch (CLT2). Then the paper is exited by the paper exit belt driven by the stack transport motor (M8) and the stack transport rollers-1 and -2 driven by the transport motor (M2) onto the movable tray.

The home position of the paper exit belt is detected by the stack exit belt home position sensor (S9).

Stack transport roller-2

Paper exit belt	Paper exit guide
	clutch

Stack exit belt home position sen

Transport motor

Stack transport roller-1

Paper exit guide

Stack transport motor

Fig. 3-16

3

© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved	MJ-1103/1104
	DESCRIPTION OF OPERATIONS

3 - 13