Toshiba MJ-1103 service manual Electromagnetic spring clutches Saddle section MJ-1104

3. Electromagnetic spring clutches (Finisher section : Common for MJ-1103/1104)

Symbol	Name	Function	P-I	Remarks
CLT1	Shutter clutch	Transmits the drive of the transport	P3-I27	P.2-8 "Fig. 2-8"
		motor to the shutter opening/closing
		section.
CLT2	Paper exit guide clutch	Transmits the stack transport motor	P10-I26	P.2-8 "Fig. 2-8"
		drive to the paper exit guide.

4. Electromagnetic spring clutches (Saddle section: MJ-1104)

Symbol	Name	Function	P-I	Remarks
CLT3	Folding blade clutch	Transmits the drive of the folding motor	P19-I19	P.2-8 "Fig. 2-8"
		to the folding blade.
CLT4	Paper holding clutch	Transmits the drive of the saddle trans-	P21-I22	P.2-8 "Fig. 2-8"
		port motor to the paper holding cam.

5. Solenoids (Finisher section : Common for MJ-1103/1104)

Symbol	Name	Function	P-I	Remarks
SOL1	Catching solenoid	Catches paper on the buffer tray.	P5-I4	P.2-8 "Fig. 2-8"
SOL2	Buffer roller lift solenoid	Moves up/down the buffer roller	P8-I6	P.2-8 "Fig. 2-8"
		(Turned ON to lift up the roller).
SOL3	Patting solenoid	Drops paper on the buffer tray to the	P8-I5	P.2-8 "Fig. 2-8"
		finisher tray.
SOL4	Gate solenoid	Switches paper transport destination	P7-I29	P.2-8 "Fig. 2-8"
		(stationary tray / movable tray).

6. Solenoids (Saddle section: MJ-1104)

Symbol	Name	Function	P-I	Remarks
SOL5	Transport path switching sole-	Switches destinations where paper is	P16-I23	P.2-8 "Fig. 2-8"
	noid	to be transported (Finisher section or
		saddle stitch section).
SOL6	Assisting roller solenoid	Operates the assisting roller.	P27-I14	P.2-8 "Fig. 2-8"

MJ-1103/1104	© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
GENERAL DESCRIPTION

2 - 10