Toshiba MJ-1104, MJ-1103 service manual Paper exit to the movable tray

[C] Paper exit to the movable tray

Paper transported from the Finisher feeding section to the movable tray side is transported to the buffer tray with the exit roller driven by the exit motor (M11).

Paper transport is detected by the transport sensor (S2).

Transport sensor

Buffer tray

Exit roller

Exit motor

Fig. 3-7

The paper transported to the buffer tray it then exited to the movable tray by the buffer rollers driven by the buffer roller drive motor (M4).

At this stage, the shutter clutch (CLT1) is turned ON and the shutter is pulled up by the drive of the transport motor (M7) to prevent the paper from being transported to the finishing tray.

The opening and closing statuses of the shutter is detected by the shutter opening/closing sensor (S4).

Shutter

Buffer roller

Buffer roller drive motor

Buffer tray

Transport motor

Buffer tray

Shutter clutch

Shutter opening/

closing sensor

Fig. 3-8

MJ-1103/1104	© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DESCRIPTION OF OPERATIONS

3 - 6