MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND INSTALLATION
4 - 70
[K] Exit motor (M11)
(5) Remove 3 screws, and then take off the
assisting arm assembly.
Note:
When installing, be sure that the edge of the
arm of the assisting arm assembly comes
under the paper holding arm.
Fig. 4-198
(6) Remove 2 screws, and then take off the
paper pusher arm motor.
Fig. 4-199
(1) Take off the junction box unit.
P.4-13 "[A] Junction box unit"
(2) Remove 2 screws, and then take off the exit
motor.
Fig. 4-200
Assisting arm
assembly
Paper pusher arm motor
Exit motor