Toshiba MJ-1104 Front / rear alignment motor drive circuit, Front alignment plate is closed

[D] Front / rear alignment motor drive circuit

The front / rear alignment motor drive circuit controls the rotation and stoppage, rotational direction and motor current of the front alignment motor.

The front alignment motor is driven by pulse signals (MT5-OUT1A, MT5-OUT1B, MT5-OUT2A and MT5-OUT2B) output from the motor driver (IC45) under the command of a clock signal (TMO2), a rota- tional direction signal (MOT5-DIR) and a current setting signals (MOT5-CUR1 and MOT5-CUR0) from the CPU of the finisher control PC board, and thus this motor opens or closes the front alignment plate of the finishing tray.

The rear alignment motor is driven by pulse signals (MT6-OUT1A, MT6-OUT1B, MT6-OUT2A and MT6-OUT2B) output from the motor driver (IC41) under the command of a clock signal (TMO3), a rota- tional direction signal (MOT6-DIR) and a current setting signals (MOT6-CUR1 and MOT6-CUR0) from the CPU of the finisher control PC board, and thus this motor opens or closes the rear alignment plate of the finishing tray.

TMO2	MOT5-	MOT5-	MOT5-	Motor rotation	Remarks
	DIR	CUR1	CUR0
Clock signal	H	L	H	Normal (Low power)	The front alignment plate is closed.
Clock signal	H	L	L	Normal (Normal power)
Clock signal	L	L	H	Reverse (Low power)	The front alignment plate is opened.
Clock signal	L	L	L	Reverse (Normal
				power)
-	-	H	-	Stop

TMO3	MOT6-	MOT6-	MOT6-	Motor rotation	Remarks
	DIR	CUR1	CUR0
Clock signal	H	L	H	Normal (Low power)	The rear alignment plate is closed.
Clock signal	H	L	L	Normal (Normal power)
Clock signal	L	L	H	Reverse (Low power)	The rear alignment plate is opened.
Clock signal	L	L	L	Reverse (Normal
				power)
-	-	H	-	Stop

Finisher control PC board
			3.3V	VM
	P-RESET	5			24		MOT5/6-OUT1A
	P-RESET	13
IC21					1		MOT5/6-OUT2A
	TMO2 / 3	16	IC45 / IC41			CN17		Front / rear
CPU								alignment motor
	MOT5/6-DIR	20	Motor driver		21		MOT5/6-OUT1B	(M5 / M6)
	MOT5/6-CUR0 Current	17			4		MOT5/6-OUT2B
	MOT5/6-CUR1 control
	circuit
				SG
				Fig. 3-31

MJ-1103/1104	© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DESCRIPTION OF OPERATIONS

3 - 26