Toshiba MJ-1104, MJ-1103 Symbols used in the checklist, Preventive Maintenance Checklist

Symbols used in the checklist

Cleaning		Lubrication/Coating		Replacement	Operation check
A: Clean with alco-	L:	Launa 40	Value: Replacement cycle		O: After cleaning or
hol	SI: Silicon oil			(output pages or	replacement, confirm
B: Clean with soft	W1:White grease			develop counts)	there is no problem.
pad, cloth or		(Molykote X5-6020)	R:	Replace if deformed
vacuum cleaner	W2:White grease			or damaged
		(Molykote HP-300)
	W3:White grease
		(Molykote EM-30L)
	AV: Alvania No.2
	FL: Floil (GE-334C)
	C:	Coating material
		(Molykote CFD-409M)

Preventive Maintenance Checklist

	Items to check	Cleaning	Lubrication	Replacement	Operation	Parts list	Remarks
				(x1,000)	check	(P-I)
1	Entrance sensor (S1)	A
2	Transport sensor (S2)	A
3	Stack transport roller-1	A
4	Stack transport roller-2	A
5	Buffer roller	A
6	Exit roller	A
7	Entrance roller	A
6	Transport roller	A
9	Paddle			1,000
10	Paper pusher cam		W3				*a
11	Buffer tray shaf		W3				*b
12	Stapler carrier shaft		W3				*c
13	Rack gear (Aligning		W3				*d
	plate)
14	Finishing tray shaft		W3				*e
15	Movable tray drive gear		W2				*f
16	EFS carrier shaft		W3				*g
17	Grate-shaped guide	A	W3				*h

*a. Paper pusher cam

Apply an adequate amount of white grease (Molykote EM-30L) all around the paper pusher cam.

Paper pusher cam

	Fig. 7-2
MJ-1103/1104	© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
PREVENTIVE MAINTENANCE (PM) / FIRMWARE UPDATE

7 - 2