Toshiba MJ-1104, MJ-1103 Junction box Side alignment Unit, Fold unit Stacker EFS unit Saddle tray

•Center-binding mode

Paper is exited following the procedure below when the Saddle Stitch Finisher is installed. 1 The stacker is moved to the stapling position according to the detected paper size.

2 Paper is transported to the stacker and then side alignment operation is performed. 3 The stack of paper is stapled after the alignment for the last page is finished.

4 The stacker is moved to the paper folding position to fold the paper.

5 The paper is transported to the additional folding position to be folded again. 6 The paper is exited to the saddle tray.

Junction box

Side alignment Unit

Stapler unit		2
Fold unit		3
		Stacker
EFS unit		4
		5
Saddle tray	6	1
		4

Fig. 3-3

MJ-1103/1104	© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DESCRIPTION OF OPERATIONS

3 - 2