Toshiba MJ-1104, MJ-1103 service manual Front saddle stapler, Fold plate, Mylar

(5)Remove 3 screws and take off the front sad- dle stapler clinch unit.

(6)Remove 3 screws and take off the rear sad- dle stapler clinch unit.

Front saddle stapler	Rear saddle stapler
clinch unit	clinch unit
	Fig. 4-88

(7)Disconnect each connector of the front and

saddle stapler drive units from the SDL board side.

(8) Remove 2 screws and take off the front sad- dle stapler drive unit.

(9) Remove 2 screws and take off the rear sad- dle stapler drive unit.

Connector

Front saddle stapler drive unit

Rear saddle stapler drive unit

(10) Remove the fold plate.

Note:

When replacing the fold plate (ASYS-PLT- FOLD-RLR-SDL), be careful not to damage the mylar.

Fig. 4-89

Fold plate

Mylar

Fig. 4-90

MJ-1103/1104	© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND INSTALLATION

4 - 32