Toshiba MJ-1103, MJ-1104 service manual Additional folding / exiting

[G] Additional folding / exiting

The stack of paper folded by the folding roller is stopped with the exit transport sensor (S41) at the stop- ping position. The folded paper is then folded again by moving the additional folding carrier roller for- ward and backward.

The home position of the additional folding carrier is detected by the additional folding home position sensor (S39).

The additional folding carrier is driven by the additional folding motor (M20). The rotation of the addi- tional folding motor (M20) is detected by the additional folding motor encoder sensor (S42).

Additional folding	Exit transport sensor
home position sensor
Additional folding carrier
Additional
folding carrier
roller
	Additional folding
Additional	motor encoder sensor
folding motor

Fig. 3-23

After this, the paper is exited to the saddle tray with the saddle exit roller driven by the folding motor (M17).

The passing of the paper is detected by the exit sensor (S31).

The presence of paper on the saddle tray is detected by the stack tray paper detection sensor (S32).

Folding motor

Exit sensor

Saddle exit roller

Folding roller

Saddle tray	Stack tray paper
	detection sensor
	Fig. 3-24
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved	MJ-1103/1104
	DESCRIPTION OF OPERATIONS

3

3 - 19