![](/images/new-backgrounds/1197970/197970163x1.webp)
Advanced Features
USER-CUSTOMIZED OPERATING MODE
OVERVIEW
This mode recalls a
This can be useful for storing your favorite combi- nation of operational settings for a mode you often use. Digital operators who go through the various proce- dures of combining filter selections, carrier and dis- play offsets, etc., for a custom environment optimized for FAX or SSTV (as an example) can store these set- tings for easy recall. For special modes that require unique configuration of transceiver settings that are not used elsewhere, the “USER” mode comes in handy for storing these parameters while keeping other trans- ceiver settings default for general operation.
The following parameters are
CUSTOM
MENU SELECTION
Selected with: | Comments: | ||
|
| ||
Sub VFO B Dial | Main VFO A Dial | ||
| |||
| LSB, USB, | Select the op- | |
| CW (USB), | erating situa- | |
MODE | CW (LSB), | tion to which | |
RTTY (LSB), | t h a c u s t o m | ||
| |||
| RTTY (USB), | setting will be | |
| PACKET (LSB) | applied. | |
|
|
| |
DISPLAY | ±5.000 kHz | ø1 | |
OFFSET | |||
|
| ||
|
|
| |
RX PLL | ±5.000 kHz | ø1 | |
|
|
| |
RX CARRIER | 450 - 460 kHz | ø1 | |
|
|
| |
TX PLL | ±5.000 kHz | ø1 | |
|
|
| |
TX CARRIER | 450 - 460 kHz | ø1 | |
|
|
| |
RTTY OFFSET | ±5.000 kHz | ø1 | |
|
|
| |
PRESET MODE | OFF/SSTV/FAX | ø2 | |
|
|
|
ø1: the tables on pages 106, 107, and 110 list vari- ous menu selected receive and display offsets for each mode.
ø2: Settings are factory preset &
Mode - Select from LSB, USB, CW (upper or lower), RTTY (upper or lower), or Packet (lower sideband only).
Display Offset - Choose a custom offset ±5.000 kHz (in
Tx and Tx PLL Offset - Choose a custom PLL off- set ±5.000 kHz (in
Tx and Tx Carrier - Changes the carrier injection frequency between
RTTY Custom Shift - Choose a custom
“Easy Setting” - this allows choosing one of two
With the user settings customized as desired, press and hold in the [PKT] key (its red LED blinks for three seconds when activated) to recall the “User” mode. The custom settings will take effect, and the display changes to reflect the new operating mode. To exit the “User” Mode, simply press any band, mode or function key so the red LED in the [PKT] key turns off.
Note: see pages 106 and 107 for a complete listing of default settings according to operating mode.
Important!
While the “USER” Mode allows customizing op- eration for various operating environments, chang- ing some settings (especially the PLL offset and carrier injection) can adversely affect transceiver operation. Before making any “USER” Mode ad- justments, ensure you have a firm understanding on how changing these affect transceiver opera- tion and frequency display. If you are not sure, we recommend leaving them as set (to their default values shown in the table).
You can return all transceiver settings (menu se- lections) to their default values at any time by per- forming a CPU reset. Simply hold the [SUB(CE)], [29(0)], & [ENT] keys together while turning the transceiver on.
page 80 |
|