THE VISIONEER ONETOUCH 9420 USB SCANNER | 3 |
Scanner lid—Protects the document from light and contamination.
Transparency light source—The light source for scanning 35mm slides and negatives. Shines light down through 35mm slide or negative transparencies, then through the glass onto the scanning sensors in the body of the scanner.
Glass—Items are placed face down, aligned at the arrow symbol at the upper left corner.
Reference marks—Marks on the border of the glass show where to align various paper sizes.
Locking tab—Protects the scanner’s scan head by holding it securely in position. The locking tab, located on the underside of the scanner, must be unlocked before scanning. The scanner will not scan when locked.
OneTouch button panel—Scans to the appropriate application indicated by the button. For example, pressing the Email button scans the document, then opens your Email program with the image of the scanned document as an attachment to a new message ready for you to address and send.
Status light—Shows the scanner’s status. Green light: scanner is ready
to scan. Orange light: scanner is busy.
Option port—Connects the TPA cable to the scanner. The cable must be attached for the transparency light source to operate.
USB port—Connects the scanner to the computer. Your Visioneer 9420 scanner can connect to either a USB 1.1 or a USB 2.0 port.
Power jack—Connects the power adapter to the scanner.
TPA (Transparency Adapter) cable—Supplies power from the scanner body to the transparency light source.
Note: The scanner does not have an on/off switch. The scanner is turned on when you plug in the power adapter.
