Visioneer One Touch 9420 manual Scan pane

SCANNING FROM THE TWAIN INTERFACE 35

The Folders pane (which shows folders for organizing your scanned images) is replaced by the Scan pane.

Scan pane.

Click the arrow to see the list of scanners.

If this Scan button is not active, see the section on page 37 to set up your scanner to work with PaperPort.

3.Click the Scanner drop-down arrow, and select TWAIN: Visioneer 9420 from the drop-down list.

Note: Please wait a few moments for your selection from the drop- down list to become active. This delay only occurs the first time you select from the list while PaperPort initializes the scanner. Later on, selecting from the list activates immediately.

Note: If the Scan button at the bottom of the panel is not available when you make a selection from the Scanner drop-down list, then your scanner needs to be setup to work with PaperPort. See the section “Setting Up Your Scanner to Work With PaperPort” on page 37.