Click the tab that corresponds to the scanner button you want to configure.
Select the Destination Application that will open when you are finished scanning. You use the destination application to view and work with your scanned images.
SCANNING 35MM SLIDES AND NEGATIVES 71
ABOUT THE ONETOUCH PROPERTIES WINDOW
The OneTouch Properties window is where you can select new settings for the buttons. The tabs across the top of the window correspond to the buttons on the scanner.
Note: Some of the options on the OneTouch Properties Window (and other OneTouch windows and dialog boxes) are “grayed out” and are not available. Grayed out options are not appropriate for your Visioneer 9420 scanner. If you use the OneTouch application with other Visioneer scanners, grayed out options become active, if appropriate.
The following example of the OneTouch window shows the settings for Scan button. The button is set to scan with the scan configuration named Scan US Letter Document and then open PaperPort to display the scanned image. The format option is set to scan in the TIFF image format.
Click this tab to select options.
Select the file format for your scanned images.
Select a configuration for scanning the item.
