Visioneer One Touch 9420 manual Press a scanner button to scan

SCAN WITH THE SCANNER BUTTONS 27

If you make changes in the OneTouch Properties window, then click its Apply button, the information in the OneTouch Button Panel will update to show the new settings.

Note: If you closed the OneTouch Properties window and want to re-open it, you can press and hold down the scanner button again, or right-click the icon on the Button Panel.

2.When you are ready to scan, simply press a scanner button. Do not hold down a scanner button.

Press a scanner button to scan.

You can also scan by clicking an icon on the OneTouch Button Panel.

Note: To scan from the Button Panel, the OneTouch Properties window must be closed. Click the window’s close box, or click the Cancel or OK button on the window. See the next section, “Scan from the OneTouch Button Panel.”