SCANNING 35MM SLIDES AND NEGATIVES 63
POSITIONING A 35MM NEGATIVE FILM STRIP
1.Slide the filmstrip into the 35mm negative mask and center the frame you want to scan in the opening.
2.Place the mask on the glass so the arrow on the mask labeled Use this mask for scanning 35mm negatives is aligned with the arrow in the upper left corner of the scanner.
The 35mm negative holder also has a calibration slot next to it. Do not place items to be scanned in the calibration slot.
3.Close the lid. You’re now ready to start scanning the negatives.
4.See “Scanning 35mm Slides or Negatives from the TWAIN Interface” on page 64 to start the scanning.
