62VISIONEER ONETOUCH 9420 USB SCANNER USER’S GUIDE
POSITIONING 35MM SLIDES IN THE MASK
1.Place the mask on the glass so the arrow on the mask labeled Use this mask for scanning 35mm slides is aligned with the arrow in the upper left corner of the scanner.
Make sure the text on the mask faces up so it fits properly on the glass, aligned at the corner.
2.Follow the printed directions on the mask and place the 35mm slides horizontally into the slide holder.
Calibration slot.
Notice that the mask has a narrow slot next to the slide holder. That slot is for calibration to assure that you get the best possible scan results. Do not place items in the calibration slot.
3.Close the lid. You’re now ready to start scanning the slides.
4.See “Scanning 35mm Slides or Negatives from the TWAIN Interface” on page 64 to start the scanning.
