SCAN FROM THE ONETOUCH BUTTON PANEL

29

THE ONETOUCH BUTTON PANELS FEATURES

The OneTouch Button Panel is your on-screen set of controls for the scanner. In addition, the panel shows information about the scanner and its settings.

Click the green arrows at the top of the panel to cycle back and forth through three views of the panel.

1.Click the arrow pointing to the left to see the scanners currently attached to your computer.

Click the arrow that points to the right to see the scan setting details of the currently selected button.

Click these green arrows to cycle through the panel’s views. This is the panel’s Button view.

This view shows the connected scanner(s). You can click either the green arrow or the scanner icon to get back to the previous view. This is the panel’s Hardware view.

This view shows the scan settings for the button currently selected on the OneTouch Properties window. Right- click the icon to see the window. This is the panel’s Detail view.

2.On the OneTouch Button Panel:

Left-clicka Destination Application icon to start the scanning. If the OneTouch Properties window is open, you must close it first.

Right-clicka Destination Application icon to see its scan settings.

3.To close the OneTouch Button Panel, click the close button at its top right corner.

Page 36
Image 36
Visioneer One Touch 9420 manual Onetouch Button PANEL’S Features