SCANNING FROM THE TWAIN INTERFACE 33
6.Click OK to save your changes and close the OneTouch Properties window.
7.Press the Scan button on the scanner or click on the Scan button on the OneTouch Panel.
8.The TWAIN interface will now open.
This is the Basic
TWAIN Interface
Click either Advanced Interface or Basic Interface to toggle between the two TWAIN interface options.
Note: If you choose to use OneTouch Configure Before Scan for scanning from the TWAIN interface, the final image will be sent to the destination application set for that button.
Note: A this time the TWAIN interface is where you will adjust your scan settings. Please see the following section for adjusting the scan settings in the Basic and Advanced interfaces. 35mm slide and negative scanning is only available from the Advanced TWAIN interface.
