Xanbus Automatic Generator Start Installation
Routing Connections
EXPLOSION HAZARD
This equipment is not ignition protected. To prevent fire or explosion, do not install the AGS in locations that require
Follow all relevant instructions exactly before installing or using your AGS.
SHOCK AND ENERGY HAZARDS
Before making any connections to the generator, ensure that the generator’s starter is disabled and the generator’s start battery is disconnected.
Failure to follow these instructions will result in death or serious injury.
Connection Types Because the AGS will be part of a Xanbus system, it is necessary to consider how to route two types of connections:
•connections to the generator, thermostats, and other external devices and switches, using the included
•connections to other
Network ports |
Network cables to other Xanbus- 
enabled devices
Figure 5 AGS External Connections
Wiring harness (connection to 
generator, thermostats, and external switches)
9 |
