Xantrex Technology 809-0915 manual AGS Configuration Menu Contents

Configuration of the Xanbus AGS

When the AGS Home Screen is first displayed, the menu defaults to the

GenMode Menu. If configuration changes need to be made, the

Configuration Menu can be accessed by pressing the Enter, Up arrow, and

Down arrow buttons all at same time to access the Advanced Settings.

AC In/Charge	XAGS 00: Setup		STBY/ON
Inverter On
	GenMode	[ManualOff]	Fault Clear
Low Battery	Mode	[Operating]	Xanbus AGS Menu
Fault	Clear Faults Warnings
	View Device Info
			XAGS 00: Setup
			Advanced Settings
			GenMode	[ManualOff]
	Enter	Func	Clear Faults Warnings
			View Device Info
Xanbus System Control Panel (SCP)			FGA: 809-0921
			XAGS 00: Setup
		To access the Advanced Settings menu,
		Press Enter and Up and Down arrows together Advanced Settings
			GenMode	[ManualOff]

Clear Faults Warnings

View Device Info

XAGS 00: Config

QT EN	[Enabled]
QT Begin	[9:00PM]
QT End	[8:00AM]
Gen Type	[2]
Cfg Trigger
Cfg Gen

Multi-Unit Config

Restore Defaults

To change configuration parameters...

Press Enter to move forward into the Config menu.

XAGS 00: Triggers

Start DCV 30 Sec	[40.0V]
Start DCV 15 Sec	[Disabled]
Start DCV 2 hr	[Disabled]
Start DCV 24 Hr	[Disabled]
Stop Float	[Disabled]
Stop Absorb	[Disabled]
StopV	[Disabled]
Temp1	[Disabled]
Temp2	[Disabled]
Load	[Disabled]
Start Load	[15A]
Stop Load	[10A]
XAGS 00: Gen
Starter Cool Down	[60sec]
Gen Cool Down	[30sec]
Gen Spin Down	[3sec]
Max Runtime	[4hours]
Exercise per	[21days]
Exercise Dur	[30min]
Exercise Time	[9:00AM]
Relay 3	[Not Used]
Gen Run Hold Time	[0.5s]
Crank Delay	[1sec]
Crank Time	[30sec]

Use these buttons to change the settings.

Press ENTER to accept the new setting.

To return to the B asic Settings menu,

Press Enter and Up and Down arrows together

Use these buttons to select the desired menu.

Press ENTER to move the cursor to the changeable settings.

Press Func to return to the Xanbus AGS Home screen.

Crank Retry Time	[40sec]
Preheat Time	[0sec]
Gen Start Tries	[3]
XAGS 00: Gen
Dev Name	[AGS]
Dev Number	[00]
Connections

XAGS 00: Conn

DC Conn	[HouseBatt1]
AC In	[Grid1]
AC Out	[ACLoad]
Generator	[Gen1]

Figure 32 AGS Configuration Menu Contents

975-0082-01-01 39