Xantrex Technology 809-0915 manual Accessing the AGS Menu

Configuration of the Xanbus AGS

Accessing the AGS Menu

To change operational settings on the AGS Menu:

Use the Xanbus AGS Menu to change configuration settings, set operating mode, clear fault warnings, and view device information.

To access the Xanbus AGS Menu, start from the Xanbus System Home Screen.

To view the Select Device Menu, press Enter.

AC In/Charge	System Status			STBY/ON
Inverter On
	Battery	20.4A	53.9V	Fault Clear
Low Battery	BatLev		E--F
	Load		1235W
Fault	AC1	1150W	3202V

Menu

Enter	Func
Xanbus System Control Panel (SCP)	FGA: 809-0921

1.Use the arrow buttons to select the desired operation.

2.Press Enter to highlight the current value for that setting. Asterisks (*) indicate the last value set.

3.Use the arrow buttons to change the value. Holding an arrow button down without releasing it will scroll through the values quickly.

4.Press Enter to select the value.

5.Press Func twice to return to the Freedom SW System Home Screen.

See Figure 31.

AC In/Charge	XAGS 00: Setup		STBY/ON
Inverter On
	GenMode	[ManualOff]	Fault Clear
Low Battery	Mode	[Operating]
	Clear Faults Warnings
Fault	View Device Info

Enter	Func
Xanbus System Control Panel (SCP)	FGA: 809-0921

Auto Gen Start Menu

To select the AGS Menu, use the arrow buttons to highlight AGS “XAGS”. Press Enter to select the AGS Menu.

AC In/Charge

	Select Device	STBY/ON
Inverter On	System Settings	Fault Clear
Low Battery	FSW3012
	EMS
Fault	XAGS

Enter	Func
Xanbus System Control Panel (SCP)	FGA: 809-0921

To access the advanced settings to configure specific operational parameters:

Press the Enter button and the Up and Down Arrow Buttons at the same time.

See Figure 32.

AC In/Charge	AGS 00: Setup		STBY/ON
Inverter On
	Advanced Settings		Fault Clear
Low Battery	GenMode	[ManualOff]
	Clear Faults Warnings
Fault	View Device Info
	Setup	System

Enter	Func
Xanbus System Control	FGA: 809-0921

Figure 29 Accessing the AGS Menu Figure 30 Changing Settings

975-0082-01-01 37