Configuration of the Xanbus AGS
Overview
The AGS has a number of settings that must be configured to ensure that the generator starts and stops under the appropriate conditions and at the appropriate time. The AGS is configured using the Xanbus System Control Panel (SCP).
The Freedom SW System Home Screen on the Xanbus System Control Panel (SCP) displays basic system operational status. On the lower left corner of the Freedom SW System Home Screen, there is an arrow that points to the Enter Button below the display. Pressing the Enter Button when the Freedom SW System Home Screen is displayed will take the system to the Select Device Menu.
The AGS Menu is accessed from the Select Device menu screen. All configurable settings, generator mode, fault clearing, and device information is provided in the AGS Menu.
AC In/Charge | STBY/ON | |
Inverter On | ||
Fault Clear | ||
Low Battery |
| |
Fault |
|
Enter | Func |
Xanbus System Control Panel (SCP) | FGA: |
Enter Button | Up arrow | Down arrow | Func Button |
Confirms | Scrolls up | Scrolls down | Cancels |
selection of a | one line of | one line of text | selection of a |
menu item | text | Decreases a | menu item |
Moves to the | Increases a | selected value | Returns to the |
next screen | selected |
| previous screen |
| value |
|
|
Figure 28 Xanbus System Control Panel (SCP) Navigation Buttons and Freedom SW System Home Screen
36 | Xanbus Automatic Generator Start (AGS) Owner’s Guide |
