Xantrex Technology 809-0915 manual Connecting the Wiring Harness to the AGS

Xanbus Automatic Generator Start Installation

Connecting the Wiring Harness to the AGS

After all the external connections have been wired to the wiring harness, the connector on the wiring harness must be plugged into the 20-contact connector on the AGS.

To connect the wiring harness to the AGS:

◆With the click-tab on the wiring harness connector on top (away from the mounting surface), insert the wiring harness connector into the 20- contact connector on the AGS until the tab clicks into place.

Figure 24 AGS External Connections

975-0082-01-01 33