SPECIFYING INPUT PARAMETERS
XEROX DOCUPRINT 180 LPS PDL REFERENCE 4- 53
Table 4-60 lists the components of this example and their definitions.
If
m
is computed as less than or equal to zero, MARGIN should be
specified as zero or ignored altogether. Failure to do so results in
printing blank even-numbered pages (back sides). Note that varying
the margin does not alter the appearance of the printed page
because of the absolute positioning information embedded in the
data.
Examples
The following are sample VOLUME commands for several different
host types.
VOLUME HOST=UNIVAC,LABEL=STANDARD,UNPACK=T4X3,
CODE=ASCII,LCODE=ASCII;
VOLUME HOST=IBMOS;
VOLUME HOST=IBMONL,LABEL=NONE,,
CODE=EBCDIC;
VOLUME HOST=B6700,LABEL=ANSI,BMULT=6,RMULT=6,
PLABEL=YES;
VOLUME HOST=H2000,LABEL=SPR,CODE=H2BCD,
UNPACK=T4X3H2;
VOLUME HOST=OCTDUMP,CODE=H6BCD,UNPACK=T4X3;
Table 4-60. Example components and definitions
Component Definition
m
Positive decimal number of the form nnn.dd (up to
two digits to the right of the decimal point)
V2Even (back) side shift value in inches
BEGIN Scan line in inches as specified in the PDE (hpos in
portrait, vpos in landscape)
ALI Anticipated scan alignment (estimated inches
equivalent, 3 scans=.01 in.)