PRINT FORMAT COMMANDS
6-108 XEROX DOCUPRINT 180 LPS PDL REFERENCE
RTEXTThis parameter specifies text to be printed on a separate page
preceding a report (or copy ply).
Syntax ROUTE RTEXT =
option(s)
Options Table 6-80 lists the parameter option(s) and definition(s).
Table 6-81. RTEXT parameter option(s) and definition(s)
Option(s) Definition(s)
sc
| (
sc
,[
passnum
| ALL],
[
line
,[
col
[,
fontindex
]]])
This option has the following components:
•
sc
Specifies the message to be printed (1 to 132
characters). It is printed with the first font
specified in the FONTS parameter of the PDE
command (refer to fontindex).
•
passnum
May be either an integer number or the keyword
ALL. An integer number specifies the pass
(copy ply) to which the text applies.
•ALL
Specifies that the text applies to all copies. If
there is more than one RTEXT parameter in a
DJDE packet, passnum must be in increasing
numeric order.
The default is passnum = 1.
•
line
Specifies the line number on which the first line
of a block of RTEXT message is printed. The
default is line 1 for the first text string of the
pass. Otherwise, the default is the next line of
the page. Only one RTEXT parameter may be
specified per line for a passnum.
•
col
Specifies the column number at which the first
character of a block of RTEXT messages is to
be printed.
The default i s column 1.
•
fontindex
Identifies the index (starting with 1) of the PDE
font with which the text is printed.
rtext-id
This option is used to reference a cataloged file of
RTEXT parameters previously compiled by PDL.
NONE Specifies that no text is to be printed on a separate
page.
The default is NONE.