SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES )
XEROX DOCUPRINT 180 LPS PDL REFERENCE 8- 55
PMODE
This parameter specifies the printing mode for each page.
LANDSCAPE indicates that printing is to be parallel to the long edge
of paper. PORTRAIT indicates that printing is to be parallel to the
narrow edge of paper. If PMODE is changed through a DJDE
command, the BEGIN command should be respecified (even if the
same horizontal and vertical position has been specified in the
previous BEGIN parameter).
Syntax PMODE =
option(s)
Options Table 8-42 lists the parameter option(s) and definition(s).
RFORM
This parameter specifies a form to be printed with all RTEXT pages.
It takes effect on the next RTEXT page. The parameters are the
same as for the ROUTE command defined in the chapter "Print
format commands."
Syntax RFORM =
option(s)
Options Table 8-43 lists the parameter option(s) and definition(s).
Table 8-46. PMODE parameter option(s) and definition(s)
Option(s) Definition(s)
LANDSCAPE Indicates that printing is t o be parallel to the long
edge of paper.
PORTRAIT Indicates that printing is to be parallel to the narrow
edge of paper.
Table 8-47. RFORM parameter option(s) and definition(s)
Option(s) Definition(s)
form-id
This is the name of a file cataloged in the FRM
directory. It is created by compiling a file of forms
source commands, called a JSL, with the FDL
compiler. (Refer to the DocuPrint 180 LPS Forms
Creation Guide.) The RFORM parameter is not
allowed in a ROUTE command which is being
defined as a cataloged file but is specified in t he
ROUTE command in the JSL invoking the
cataloged RTEXT file. Refer to the “Cataloged
RTEXT files” section in this cha p ter fo r further
details.
NONE Specifies that no form is to be printed.
The default is NONE.