SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES )
XEROX DOCUPRINT 180 LPS PDL REFERENCE 8-9
SKIP
This parameter offsets to the starting column of the DJDE
parameters.
Syntax SKIP =
option(s)
Options Table 8-7 lists the parameter option(s) and definition(s).
Points to note
Note the following when using the IDEN command.
When OPRINFO=YES is selected, the le ngth of the DJDE record that
prints on the sheet is whatever amount will fit on the width of the
paper. With portrait orientation, using OPRINFO=YES may cause
data or page exceeds page size errors if the DJDE record is too long.
Table 8-7. SKIP parameter option (s) and definition(s)
Option(s) Definition(s)
value
Specifies the number of bytes (beginning at 0) from
the beginning of the user portion of the record to the
beginning of the DJDE parameters. It may be a
negative number.
The default is 1.