PRINT FORMAT COMMANDS
6-82 XEROX DOCUPRINT 180 LPS PDL REFERENCE
TMODE
This parameter specifies paper sizes in order to improve throughput
efficiency.
Syntax OUTPUT TMODE =
option(s)
Options Table 6-66 lists the parameter option(s) and definition(s).
Width values can range from the 8-inch equivalent to the 17-inch
equivalent.
If you use inches (the default), refer to the table in the “Points to note”
section for the value ranges, pages-per-minute speeds, and us es
available for the various pitch modes.
The default depends on the specified paper size; the default value is
in inches.
Table 6-67. TMODE par am et er op tion(s) and definition(s)
Option(s) Definition(s)
(

width

[,

width unit

]) This option has the following components:
•

width

The process direction measurement that
determines the default pitch mode.
•

width unit

Defines the unit of measurement for the default
pitch mode in IN, CM, DOTS, and XDOTS.
IN (INCHES) is the default.