SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
8-62 XEROX DOCUPRINT 180 LPS PDL REFERENCE
SIDE
This parameter specifies repositioning of the new logical page to the
first logical page of the given side of a physical sheet. It takes effect
at a logical page boundary. The parameters are the same as for the
RPAGE command. The SIDE DJDE triggers repositioning for only a
single logical page and does not otherwise override the SIDE
parameter of the RPAGE command. It is intended to be used instead
of the RPAGE command, not with the RPAGE command. The SIDE
DJDE overrides both the RPAGE SIDE= parameter and the
ROFFSET parameter.
Syntax SIDE =
option(s)
Options Table 8-51 lists the parameter option(s) and definition(s).
Considerations It is important to ensure that the data does not pass the margin and
go off the page.
Table 8-55. SIDE parameter option(s) and definition(s)
Option(s) Definition(s)
(side-opt,
offset-opt)
This option has the following components:
•
side-opt
•
offset-opt