USING LOGICAL PROCESSING
XEROX DOCUPRINT 180 LPS PDL REFERENCE 7- 27
TEST
This parameter defines test expression for offsetting pages to the
stacker tray.
Syntax ROFFSET TEST =
option(s)
Options Table 7-19 lists the parameter option(s) and definition(s).
There is no default.
Points to note
Note the following when using the ROFFSET command:
•The ROFFSET feature prints the record satisfying the test
expression according to the normal job parameters.
•If ROFFSET is specified for an uncollated job, an offset occurs
on only the first copy of the offset page.
•If a record satisfying the ROFFSET test criteria is not selected
for or deleted from printing, the offset indication is maintained
and used on the next record printed.
•If OFFSET=FIRST (or ALL) and the ROFFSET criteria is
satisfied on the first page of a report, the normal offset from the
preceding report is nullified.
•If segments are specified, the ROFFSET command is ignored.
Table 7-19. TEST param e te r op tion (s) and definition(s)
Option(s) Definition(s)
test-exp
The format and syntax of a test-exp are defined in the
“Test expression definition” section. If a test-exp is
satisfied, the record causes an offset in the stacker
tray. If a
test-exp
is satisfied in duplex mode, the
logical page on which the record occurs is the first
logical page of a new sheet.