SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
8-72 XEROX DOCUPRINT 180 LPS PDL REFERENCE
DJDE FILE parameter
This DJDE provides a capability of loading card-image or LPS-
labeled files to the LPS disk while a printing job is in progress. The
print job may be invoked solely for the purpose of downloading files;
in other situations, the files may be interleaved with variable text data
so that they are available when referenced by input or output
processing. In either case, a DJDE packet must immediately precede
the data for a file (or batch of files) that is to be copied to the LPS
system disk. The DJDE packet must include a FILE parameter used
to signal the start of the file data.
The DJDE FILE parameter is record oriented and is therefore app lied
immediately. It may be included with other record-oriented or page-
oriented DJDE parameters in a DJDE packet. The FILE parameter is
specified as follows:
FILE = ([
file-name
],[[
file-type
],[[
f
],[
s
],[
n
]]])
Table 8-61 lists the parameter option(s) and definition(s).
For LPS-labeled files, the DJDE FILE parameter may be specified as
follows:
FILE=( )
In this case, the file name and file type are obtained from the label
record that precedes the file data.
Table 8-65. FILE param e te r opti on (s) and definition(s)
Option(s) Definition(s)
file-name
This is a 1 to 6 character name used to identify the
disk file.
file-type
This is a 3 character file type symbol.
f
This is one of the following file input format
parameters:
C = card-image format
L = LPS-labeled tape format (default)
s
This is one of the following file storage parameters:
D = delete after report printed
P = permanent (default)
n
This is the maximum number of card-images
(default=120).