DEFINING CLUSTERS
5-8 XEROX DOCUPRINT 180 LPS PDL REFERENCE
Step 4. Use the FEED= DJDE in the JSL file to specify the cluster to be used.
For example:
...
...data for cover letter...
DJDE FEED=BILPAG,END;
...data for bill...
DJDE FEED=SUMMRY,END;
...data for summary sheet
(and in the JSL)
OUTPUT STOCKS=BILLS, FEED=COVER;
Note: The specified cluster must be identified in the active
stockset.
If clusters are used in the print job, the OUTPUT command requires
the STOCKS= parameter; the FEED= parameter is optional. The
INIFEED= parameter of the STOCKSET command takes effect when
no FEED= parameter is coded. If the STOCKSET command has no
INIFEED= parameter, the first cluster spe c i fied in the STOCKSET
command is used. The following example produces the same results
as the previous example.
BILLS: STOCKSET ASSIGN=(’CV102’, COVER),
ASSIGN=(’BL231’, BILPAG),
ASSIGN=(’SM233’, SUMMRY),
INIFEED=COVER;
OUTPUT STOCKS=BILLS;
Note: The STOCKS=DJDE makes the STOCKSET comman d
INIFEED= parameter take effect, thereby canceling the previous
FEED= parameter.
The STOCKSET command has an optio nal SYSPAGE=p arameter. I t
feeds the system pages (for example, PLABEL, OPR INFO, rollover
marker pages, accounting pages) from the specified cluster;
otherwise these pages are printed from the MAIN cluster. The
following example illustrates its use:
BILLS: STOCKSET ASSIGN=(’CV102’, COVER),
ASSIGN=(’BL231’, BILPAG),
ASSIGN=(’SM233’, SUMMRY),
ASSIGN=(’RED00’, RED),
INIFEED=COVER,
SYSPAGE=RED;
OUTPUT STOCKS=BILLS;