SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES )
XEROX DOCUPRINT 180 LPS PDL REFERENCE 8- 49
JDL
The
jdl-id
specifies the name of the JDL to be invoked at the next
page boundary. The
jdl-id
must exist on disk in the JDL directory. If
only JDL is specified (not JDE) in the DJDE, the JD E to be used is
the one named in the START command. In a DJDE packet
containing a JDL parameter, other record- or page-oriented DJDE
parameters override parameters specified by the JDL DJDE.
Syntax JDL =
option(s)
Options Table 8-35 lists the parameter option(s) and definition(s).
MAP
This parameter references a previously created font mapping file
(file-name) from a [label:] SEFFNT command
Syntax MAP =
option(s)
Options Table 8-36 lists the parameter option(s) and definition(s).
Table 8-39. JDL parameter option(s) and definition(s)
Option(s) Definition(s)
jdl-id
The
jdl-id
specifies the name of the JDL to be invoked
at the next page boundary.
Table 8-40. MAP parameter option(s) and definition(s)
Option(s) Definition(s)
file-name
References a previously created font mapping file
(file-name) from a [label:] SEFFNT command