SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
8-52 XEROX DOCUPRINT 180 LPS PDL REFERENCE

NUMBER

This parameter specifies page numbering control. It takes effect on
the next logical page boundary. The parameters are t he same as
those for OUTPUT command.
Syntax NUMBER =
option(s)
Options Table 8-39 lists the parameter option(s) and definition(s).
Example NUMBER=(1,1,40,1),END;
Table 8-43. NUMBER parameter option(s) and definition(s)
Option(s) Definition(s)
(
pnum
,
lnum
,
cnum
[,
findex
])
NO
This option has the following components:
•
pnum
Page number: specifies the starting number
(an integer) for page numbering. The
beginning page number may be non-
positive. The number is incremented at
page transitions but not printed until it goes
positive. The maximum page number that
will be printed is 2,147,483,647.
•
lnum
Line number: specifies an integer line
number on which the page number is to be
placed.
•
cnum
Column number: specifies an integer
ending column number for the page number
sequence.
•
findex
Font index: the list of fonts specified in the
FONTS parameter of the PDE command. If
not specified, the first font in the list is used.
•NO
Specifies that no page numbering is to be
performed.
The default is NO.