SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES )
XEROX DOCUPRINT 180 LPS PDL REFERENCE 8- 29
Parameter rules
Note the following rules:
•All parameters have the form
keyword
=
value
•
values
must be specified as shown in the BTEXT command
syntax. A
value
may be a keyword as shown in the BTEXT
command syntax or text described as listed in table 8-20.
•Parameters are separated by a comma.
•
values
cannot have commas embedded.
•White space within a parameter is ignored if it immediately
precedes or follows the ”=” sign.
•White space followin g a value is ignored .
•White space preceding or following a comma is igno red.
•A comma following the last parameter is ignored.
•Parameter keyword text is case insensitive.
PRA=
nnn
Page reconciliation amount. This is the total value of the p age, up to 11 digits
plus a decimal point may be specified. Comm as are not allowed. This option
is required in order to print an audit report reconciliation on amount.
Note: This parameter is dependent upon the SEQ parameter.
TXT=
xx...x
Identifying text. It may be up to 64 characters. If present, prints as detail
information for each page expected or delivered as reported on the audit
report.
Note: This parameter is dependent upon the SEQ param eter.
NONE Specifies no BTEXT.
The default is NONE.
Table 8-19. BTEXT parameter option(s) and definition(s)
Option(s) Definition(s)
Table 8-20. Value(s) and definition(s)
value(s) Definition(s)
xxx
Alphanumeric text, including spaces. Case
sensitivity is retained.
nnn
Numeric text, including one optional decimal point.
Maximum of two digits after the decimal point.
sss
Numeric text, no decimal points.
yy-mm-dd
Numeric text describing year, month, an d day.
Each pair of characters is separated by a dash.
Eight characters in all are required.