EDITOR QUICK REFERENCE
E-2 XEROX DOCUPRINT 180 LPS PDL REFERENCE
full command line, a continuation of a previous command line, or a
comment line.
For example, if you wish to add line 00011, following 000010, you
would simply enter 11.
Step 6. Input the text, your JSL co ding, by entering the text after the line
number which appears on the system controller disp lay.
For example, the display would show:
EDIT>INSERT 10,10
00010.
You would then enter your text following 00010:
00010 XAMPLE:JDL;
The display would then provide the next record, 00020 for you to
enter another line of text.
Step 7. Save the text file you have created on system disk by entering:
SAVE
file-id
Remember that
file-id
consists of
file-name
.
file-type
.
Step 8. Terminate the editing session.
To end the editing session without printing the work file, simply enter
END
To end the editing session and print the work file, enter:
PCE
PCE represents PRINT, CLEAR, and END. This provides a p rint
version of your source, clear the workfile, and end the editing s ession
in one command.
Obtaining files already stored on system disk
To transfer the source code to a work file, follow these steps:
Step 1. Gain access to the file by entering:
LOGON 3,
password
Step 2. Begin the editing session by entering:
EDIT
Step 3. Clear the work file of all data by entering:
CLEAR
Step 4. Retrieve the file you want by e ntering:
GET
file-name
.
file-type
Displaying the text of a file
If you wish to see the lines of source code in the work file, you can
use any of the following options:
•Display the entire work file by entering