13. Loading from Memory Card or Disk
126 RS7000

This sub mode is used to load data from a memory card or disk.

4 display pages are provided: Load, Import, SCSI Setup, and SCSI Communication.

Press [LOAD] from the PATTERN Play or Patch mode to go to the Load display.

Load Page Structure
The LOAD sub-mode includes the following display pages.

●Load...(Page 126)

Loads data into the internal memory from memory card or disk.

●Import...(Page 129)

Loads sequence or sample data saved to disk using other equip-
ment, or saved to memory card or disk by a computer.

●SCSI Setup...(Page 131)

Provides access to a number of SCSI settings.

●SCSI Communication...(Page 132)

Allows communication with the YAMAHA TWE Wave Editor
application running on a personal computer.
Loads data to internal memory from a memory card or disk.

Load Procedure

1. Press the [LOAD] button from the PATTERN Play or Patch
mode to go to the Load page.
2. Use [Knob 2] (FILE TYPE) to select the type of file you want
to load.
3. Press [F1] (CARD/SCSI) to specify whether you want to load
from a memory card or disk.
4. Press [F4] (OK) to go to the load execution page.
5. Use [Knob 1] to select the file to be loaded.
If the file to be loaded is inside a folder, Use [F1] ( ) and
[F2] (OPEN) to move to the folder containing the file.
6. Use [Knob 4] to select the style or track to which the data is
to be loaded.
If the ALL file type was selected in step 2, this parameter
does not need to be set and will appear as a blank on the dis-
play.
13. Loading from Memory Card or Disk
NOTE
•Refer to “Chapter 12: Saving to Memory Card or Disk” for information about the types of memory cards
and disks that can be used with the RS7000. (Page 114)
•If the memory protect function is ON, “Memory Protected” will appear on the display when the [F1] button
is pressed and it will not be possible to load data. In this case go to the UTILITY mode System page (Page
257) and turn MEMORY PROTECT “OFF”.
[1] Load Page