7. Pattern Chain Editing
176 RS7000
• Complex time signatures can be created by changing the meter at
appropriate measures. It is also possible to switch sections on
every beat (or 8th note or 16th note) to create special effects.
6. If you mistakenly enter data, move the cursor to that location
and press [F3] (CLEAR) to delete the event.
Display Parameters
When the BPM or SCENE/MUTE track is selected
When a pattern track is selected
1Track
[Settings] BPM, SCENE, PATT
BPM..................BPM (Tempo) track
SCENE..............Scene/Mute track
PATT.................Pattern track
Selects the track to be edited.
2Measure, Beat, and Clock
[Settings]
Measure 001 ~ 999
Beat 1 ~ 16 (depends on meter)
Clock 000 ~ 479 (depends on meter)
Indicates the location of the corresponding event. Changing
any of these values changes the location of the event accord-
ingly.
3Event and Parameters
[Settings]
BPM Track
•Tempo Change: 001.0 ~ 300.0 (BPM)
.............Tempo change events.
SCENE/MUTE Track
•Scene Memory Number: Scene Memory 1 ~ 5
.............Recalls a scene memory.
•Mute Memory Number: Mute Memory 1 ~ 5
.............Recalls a mute memory.
•Track Mute: Track Mute
.............Track mute on/off events. Tracks 1 ~
16 are displayed in order from left to
right. indicates that mute is off;
indicates that mute is on.
Displays the type of each event.
For details about the event types and their parameters refer to
“Chapter 7: Other Information”, page 263.
4↑ ↓ (Cursor ↑ and ↓) ....................................... [Knob 1]
Moves the cursor up or down the event list to select an event
for editing.
5← → (Cursor ← and →) ................................ [Knob 2]
Moves the cursor left or right to select the parameter to be
edited for the current event.
6DELETE..........................................................................[F2]
Deletes the currently selected event.
7INSERT ..........................................................................[F3]
Jumps to the Insert page to allow insertion of a new event.
8VALUE ...................................[Knob 4], [SHIFT]+[F4]
Adjusts the value of the selected parameter.
9Measure
[Settings] 001 ~ 999
Sets the measure for which the meter, style or section is to be
edited. [Knob 1] can be used to move from measure to mea-
sure.
NOTE
Be sure to enter “END” at the end of the chain.
Edit Change Page
1 3
2
4 6 7 85
[Knob 1] [F2]
[Knob 2] [F3] [Knob 4]
[SHIFT]+[F4]
0 9 A B
C
Meter Measure Style Number Section
Clear
NOTE
“TOP” and “END” are displayed at the begin-
ning and end of the data, respectively. “TOP”
and “END” are not phrase data and cannot be
edited.