Yamaha RS7000 Tap Tempo Entry, Free Memory Display, Initializes the Master Effect settings, Undo/Redo, Auto Repeat, Auto Load

3. Basic Operation

68 RS7000

Tap Tempo Entry

With this function you can enter a BPM setting by tapping the

[TAP] button at the appropriate tempo.

Tap the [TAP] button 3 or 4 times in the PATTERN, PATTERN

CHAIN, or SONG mode to automatically enter the correspond-

ing BPM.

Free Memory Display

If you press [UTILITY] while holding [SHIFT], the amount of

free memory will be shown while the buttons are held. The

amount of recordable memory (the amount of memory available

for recording or loading samples) may increase if the utility mode

wave memory optimize function is executed.

This will not be displayed while standing by for sequence or sam-

ple recording, or during recording.

Initializes the Master Effect settings

Press [MASTER] while holding [SHIFT] to initialize the cur-

rently selected master effect.

Undo/Redo

The Undo job cancels the changes made by the most recent oper-

ation, restoring the data to its previous state.

The Redo job cancels Undo and restores the changes.

Undo/Redo can be executed from any display page except Save,

Load and Edit by pressing the [JOB] button while holding the

[SHIFT] button. Undo and Redo are selected alternately each

time the [JOB] button is pressed.

Auto Repeat

The sequencer [ ] and [ ] buttons include an auto key

repeat function. Hold either button to continuously scroll through

the measures in the corresponding direction.

Auto Load

If the power is turned on while holding one of the white keys on

the keyboard as listed below, the Auto Load function will be acti-

vated and the corresponding ﬁle will be loaded automatically.

Files to be loaded using the Auto Load function must initially be

created and saved via the appropriate mode SAVE page with the

ﬁle name “AUTOLOAD_1” ~ “AUTOLOAD_9”, using the

“ALL” ﬁle type.

Once a ﬁle has been set it will be automatically loaded without

having to press a keyboard key.

White Key [1] ................AUTOLD_1.R2A

White Key [2] ................AUTOLD_2.R2A

White Key [3] ................AUTOLD_3.R2A

White Key [4] ................AUTOLD_4.R2A

White Key [5] ................AUTOLD_5.R2A

White Key [6] ................AUTOLD_6.R2A

White Key [7] ................AUTOLD_7.R2A

White Key [8] ................AUTOLD_8.R2A

White Key [9] ................AUTOLD_9.R2A

White Key [10] ..............Auto Load function Off

For example, if you’re working on a project but need to stop and

turn the power off for a while, save the project with the ﬁle name

“AUTOLD_1”. Then, hold the [1] white key when you turn the

power back on and the project will be automatically reloaded.

NOTE

•Undo/Redo cannot be used during sequencer

playback or recording, or while the arpeggio

function is operating.

•Undo/Redo does not work with sample voice

operations.

PAD ASSIGN

TAP BPM

Tap several times to set the tempo.

NOTE

•If a SCSI drive is connected, first a memory

card will be searched in file order, then drives

with SCSI IDs 0 ~ 7 will be searched in order,

and the first matching file located will be

loaded.

•The “AUTOLD_1.R2A” file is set to be loaded

automatically as the factory default.