14. Pattern & Phrase Editing — The Pattern Jobs
146 RS7000
Appends one phrase to the end of another to create one longer
phrase.
1Style a, 2 Phrase a
[Settings] Style a ........... 01 ~ 64
Phrase a........001 ~ 256
Specify phrase “a”, which will be appended to Phrase “b”.
3Style b, 4 Phrase b
[Settings] Style b ........... 01 ~ 64
Phrase b........001 ~ 256
Specify phrase “b”, to which Phrase “a” will be appended.
This job splits a selected phrase into two separate phrases.
1Source Style, 2 Source Phrase
[Settings] Style .............. 01 ~ 64
Phrase...........001 ~ 256
Specify the source style and phrase. After the Split Phrase
operation the section of the phrase before the specified split
measure will remain, and the section following the split mea-
sure will be moved to the split destination phrase 6.
3Meter
[Settings]
1/16 ~ 16/16; 1/8 ~ 16/8; 1/4 ~ 8/4
Sets the meter of the split phrase segments after the split
operation.
The phrase meter can be changed later.
21 Append Phrase
NOTE
If this job is applied to phrases which use sam-
ple voices, the sample voices will not be
appended.
Phrase “a”
Phrase “b”
Append Phrase
1 2
43 [Knob 2] [Knob 3] [F4]
b
a
22 Split Phrase
NOTE
If this job is applied to phrases which use sam-
ple voices, the sample voices will not be split.
CAUTION
The job overwrites any data already existing in
the destination phrase.
Original phrase Split measure
Split Phrase
Original phrase Split destination phrase
1 2 3 4
65 [Knob 2] [Knob 3] [F4]