13. The Song Jobs
218 RS7000
EXC (System exclusive)................
ALL (All events)............................
When Track is BPM:
Event Type Range
BPM (Tempo)................................
When Track is SCENE:
Event Type Range
ScnM (Scene Memory)...................
MutM (Mute Memory).....................
TrMt (Track Mute)..........................
This job moves all instances of specified event data from a speci-
fied range of a track to the same range in a different track.
Details are the same as the PATTERN mode (Page 142).
1Source Track
[Settings] 01 ~ 16
Selects the track from which events are to be extracted.
2Source Range
[Settings]
Measure:Beat:Clock
001:1:000 ~ 999:16:479
4Destination Track
[Settings] 01 ~ 16
The following parameters are the same as in the
PATTERN mode (Page 142).
3Event
Creates continuous pitch bend or control change data over the
specified range.
Details are the same as the PATTERN mode (Page 142).
1Track
[Settings] 01 ~ 16, BPM, ALL
2Range
[Settings]
Measure:Beat:Clock
001:1:000 ~ 999:16:479
3Event Type
[Settings]
When Track is 01 ~ 16:
Event Type Range
PB (Pitch bend).............................
CC (Control change)........................ 000 ~ 127, ALL
CAT (Channel aftertouch)..............
EXC (System exclusive)................
When Track is BPM:
Event Type Range
BPM (Tempo)................................
5Data
[Settings] 000 ~ 127
(-8192 ... +8191 for pitch bend data,
1.0 ~ 300.0 for BPM data)
The following parameters are the same as in the
PATTERN mode (Page 142).
4Times
6Clock
13 Extract Event
NOTE
If this job is applied to a track that uses sample voices,
the sample voices will not be moved to the destination
track but the note data that triggers them will, with the
result that the samples will no longer sound. To make
the sample sound, use the MIXER sub mode (Page
194) to assign the appropriate sample voice to the
destination track.
2
4
1 3
[Knob 2] [Knob 3] [F4]
14 Create Continuous Data
21 5 6 3 4 7
[Knob 2] [Knob 3] [F4]