4. The Sample Jobs
RS7000 249
5
The Sampling Mode
2KEY (Key Number)............................................[Knob 2]
[Settings] C-2 ~ G8
Specifies the key number of the sample to be pitch converted.
3PITCH.......................................................................[Knob 3]
[Settings] -12 ~ 0 ~ +12
Specifies the amount and direction of pitch shift in semitone
increments.
4FINE..........................................................................[Knob 4]
[Settings] -50 ~ 0 ~ +50
Specifies the amount and direction of fine pitch shift in cent
increments (1 cent = 1/100th of a semitone).
5AUDITION.......................................................................[F2]
Plays the specified sample.
Plays the pitch-converted sample if pressed after [F4] (DO!)
is pressed to pitch convert the sample.
6DO!....................................................................................[F4]
Executes the job.
7CREATE..........................................................................[F3]
Saves the processed sample to the target sample number,
overwriting the original sample.
If the original sample is a Pitched Sample it will be overwrit-
ten at this point. If the original sample is part of a Sample Kit
Voice a key-number selection page will appear.
8CREATE TO
(Destination Key Number).............................[Knob 2]
[Settings] C-2 ~ G8
Specifies the key number to which the processed sample will
be saved.
9OK......................................................................................[F3]
Saves the pitch-converted sample to the specified destination
key number.
Varies the level of the sample to produce a fade-in or fade-out.
1SAMPLE (Sample Number).......................... [Knob 1]
[Settings] 001 ~ 128, C001 ~ C128
Specifies the sample voice to which the fade-in or fade-out is
to be applied.
2KEY (Key Number)........................................... [Knob 2]
[Settings] C-2 ~ G8
Specifies the key number of the sample to which the fade-in
or fade-out is to be applied.
3FADE TYPE.......................................................... [Knob 3]
[Settings] IN, OUT
Selects a fade-in (IN) or fade-out (OUT).
NOTE
This parameter is not available when the speci-
fied sample is a Pitched Voice.
98 98
[Knob 2] [F3]
08 FADE IN/OUT
NOTE
This parameter is not available when the speci-
fied sample is a Pitched Voice.
NOTE
The portions of the sample prior to the specified
START or START(ATCK) point and after the
specified END point will not be affected.
34
67
12
5
[Knob 1] [Knob 4][Knob 2] [Knob 3]
[F2] [F3] [F4]
START, START (ATCK)
Fade In
Fade Out
LENGTH
LENGTH
END