Yamaha RS7000 - page 232

1. Recording Samples (Sampling)

232 RS7000

4MONO/STEREO...................................................[Knob 4]

[Settings] MONO L, MONO R, MONO L+R, STEREO

MONO L............The L-channel signal will be recorded

as a mono sample.

MONO R........... The R-channel signal will be recorded

as a mono sample.

MONO L+R.......The L-channel and R-channel signals

will be mixed and recorded as a mono

sample.

STEREO........... A stereo sample will be recorded.

Only the STEREO option will be avail-

able when the DIGITAL or OPTICAL

source is selected.

Specifies whether the input signal will be recorded as a mono

or stereo sample.

5OK......................................................................................[F4]

Calls the sampling standby page and engages the sampling

standby mode. Pressing [STANDBY/START/STOP] has the

same effect.

[STANDBY/START/STOP]

→

[F4] or [STANDBY/START/STOP]

When this display is showing pressing the [STANDBY/START/

STOP] executes sample recording, calling the Sampling Execu-

tion page (Page 234) or the trigger wait page (Page 233).

SAMPLE TYPE = SLICE+SEQ

SAMPLE TYPE = KIT, KIT+NOTE

SAMPLE TYPE = PITCH

1TRIGGER MODE........................................................ [F2]

[Settings] LEVEL, MEASURE, MANUAL

LEVEL...............Sampling will begin as soon as an

input signal exceeding the specified

trigger level is received.

MEASURE........Sampling will begin at the specified

punch-in measure, and end at the

specified punch-out measure.

MANUAL...........Sampling will begin as soon as the

[STANDBY/START/STOP] button is

pressed.

Specifies the method by which sampling will be triggered.

NOTE

•The DIGITAL and OPTICAL settings can only

be effective when the optional AIEB2 I/O

Expansion Board is installed.

•When DIGITAL or OPTICAL is selected the

digital input signal will simultaneously be out-

put via the OUTPUT connector, while the

sound produced by the RS7000 will be output

via the DIGITAL OUT and OPTICAL OUT

connectors.

•Resampling allows samples to be re-recorded

after application of filtering, effects, and other

processing. The RS7000 allows the output

from sequencer tracks to be resampled, new

samples can be created from complex combi-

nation of multiple samples and sequence

data. The entire content of a pattern can be

easily turned into a single sample. When res-

ampling it is necessary to select the sampling

destination track (the selected destination

track will not play or be sampled).

Sampling Standby Page

NOTE

When the SLICE+SEQ sample type is selected

and you want to accurately slice the sample

according to the specified note length, it is best

to set the TRIGGER MODE to MEASURE.

1 2

[F2] [Knob 4]

132

[Knob 1] [F2] [Knob 4]

142

[Knob 1] [F2] [Knob 4]