2. MIDI Setup
260 RS7000

MIDI synchronization, echo back, and other MIDI-related setup parameters.

1 additional page can be accessed by using the [F1] and [F4] buttons, for a total of 2 MIDI Setup pages.

Display Parameters
1MIDI SYNC.............................................................[Knob 1]
[Settings] INTERNAL, MIDI, MTC
INTERNAL........Synchronization to internal clock. Use
this setting when the RS7000 is to be
used alone or as the master clock
source for other equipment.
MIDI...................The RS7000 is synchronized to a MIDI
clock received from an external MIDI
master device via the MIDI IN connec-
tor.
MTC.................. The RS7000 is synchronized to an
MTC signal received via MIDI IN. MMC
signals are transmitted via MIDI OUT.
Use this setting when the RS7000 is to
be used as a MIDI slave, such as when
synchronized to an MTC-capable
MTR.
Determines which RS7000 playback will be synchronized to
the internal clock or an external MIDI clock.
2MIDI CLOCK OUT.............................................. [Knob 2]
[Settings] OFF, MIDI A, MIDI B, MIDI A+B
OFF.............. MIDI clock is not transmitted.
MIDI A.......... MIDI clock is transmitted via MIDI OUT A.
MIDI B.......... MIDI clock is transmitted via MIDI OUT B.
MIDI A+B..... MIDI clock is transmitted via MIDI OUT A
and B.
Specifies whether and from which MIDI output MIDI clock
will be transmitted by the RS7000.
3MIDI CONTROL.................................................. [Knob 3]
[Settings] OFF, IN, MIDI A, MIDI B, MIDI A+B,
IN/OUT A, IN/OUT B, IN/OUT A+B
OFF...................MIDI control is not transmitted.
IN.......................MIDI control is received but not tre-
ansmitted.
OUT A...............MIDI control is transmitted via MIDI
OUT A.
OUT B...............MIDI control is transmitted via MIDI
OUT B.
OUT A+B..........MIDI control is transmitted via MIDI
OUT A and B.
IN/OUT A.......... MIDI control is received and transmit-
ted via MIDI OUT A.
IN/OUT B.......... MIDI control is received and transmit-
ted via MIDI OUT B.
IN/OUT A+B......MIDI control is received and transmit-
ted via MIDI OUT A and B.
Specifies whether and via which MIDI outputs MIDI control
signals — start, continue, stop, and song position pointer —
will be received and/or transmitted by the RS7000.
MMC signals are also transmitted when MIDI SYNC is set to
MTC.
4ECHO BACK........................................................ [Knob 4]
[Settings]
OFF, THRU A, THRU B, THRU A+B, REC MONITOR
OFF....................... No echo back.
THRU A.................MIDI data received via the MIDI IN
connector is re-transmitted via the
MIDI OUT A connector.
THRU B.................MIDI data received via the MIDI IN
connector is re-transmitted via the
MIDI OUT B connector.
THRU A+B............ MIDI data received via the MIDI IN
connector is re-transmitted via the
MIDI OUT A and B connectors.
2. MIDI Setup
NOTE
•MTC (MIDI Time Code) allows simultaneous
synchronization of multiple audio devices via
standard MIDI cables. It includes data corre-
sponding to hours, minutes, seconds, and
frames. The RS7000 does not transmit MTC.
A device such as the Yamaha AW4416 is
necessary as an MTC master.
•MMC (MIDI Machine Control) allows remote
control of multitrack recorders, MIDI sequenc-
ers, etc. A MMC-compatible multitrack
recorder, for example, will automatically
respond to start, stop, fast forward, and fast
reverse operations performed on the control-
ling sequencer, thus keeping playback of the
sequencer and multitrack recorder aligned.
3 421
[Knob 1] [Knob 2] [Knob 3] [Knob 4]
[F4]