13. The Song Jobs
224 RS7000
1Split Measure
[Settings] 001 ~ 999
Specifies the measure at which the song will be split.
2Split Destination Style, 3 Section
[Settings]
Style
01 ~ 64
Section
A ~ P
Specify the destination style and section.
The scene/mute data is also copied only if the split destina-
tion style is empty or if “ SAMPLE” box is being copied.
4SAMPLE
If the checkbox is checked sample voices assigned to each
track in the source song are copied to the split destination
style as local sample voices and are assigned to the corre-
sponding tracks in that pattern.
This checkbox has no effect if no sample voices are assigned
to the tracks in the source song.
This job deletes all data from the selected song or all songs.
Scene/mute memory data is also cleared.
1Song
[Settings] 01 ~ 20, ALL
2KEEP COMMON SAMPLES
If the checkbox is checked, the common sample voices used
by the specified songs will not be cleared.
Use this job to enter or change a song name. The name can be up
to 16 characters long.
1SONG NAME
Enters the song name.
Refer to “Chapter 1: Basics”, page 67, for details on name entry.
NOTE
• When there is no memory available in the
destination style for local sample voice data,
“Too Many Local Sample Voices” will appear
on the display and the sample voice data will
not be copied. If this occurs, use Sample Job
“02 Delete” (Page 246) to delete unused local
samples then try again.
•Undo/Redo (Page 213) cannot be used to
undo/redo a sample voice copy operation.
•When the “Sample” box is checked and the
[F4] (DO!) button is pressed, the “Are You
Sure? Cancel [F2]/OK [F3]” confirmation
prompt will appear. [F3] will execute the Split
Song to Pattern job.
2 3 1
4[Knob 2] [Knob 3] [F4]
28 Clear Song
NOTE
Local sample voices used by the specified song will
be cleared regardless of this setting.
29 Song Name
NOTE
Songs cannot be selected from this display. Select the
song you want to name or rename while in the SONG
Play mode.
1
2[Knob 2] [Knob 3] [F4]
1
[Knob 2] [F4]