4. The Sample Jobs
248 RS7000
8OK......................................................................................[F3]
Saves the normalized sample to the specified destination key
number.
Changes the length of the sample without changing the pitch.
The sound quality of some samples may change.
1SAMPLE (Sample Number)...........................[Knob 1]
[Settings] 001 ~ 128, C001 ~ C128
Specifies the sample voice to be time-stretched.
2KEY (Key Number)............................................[Knob 2]
[Settings] C-2 ~ G8
Specifies the key number of the sample to be time-stretched.
3RATIO......................................................................[Knob 3]
[Settings] 25 ~ 400%
Specifies the length of post-process sample as a ratio of the
length of the original sample (100%).
4ACCURACY...........................................................[Knob 4]
[Settings] SOUND 4 ~ SOUND 1, NORMAL,
RHYTHM 1 ~ RHYTHM 4
SOUND 4 ~ SOUND 1
........These settings place emphasis on
sound quality, with the “SOUND 4”
setting producing the highest sound
quality.
NORMAL.......... Produces an optimum balance of
sound quality and rhythmic feel.
RHYTHM 1 ~ RHYTHM 4
........These settings place emphasis on
rhythmic feel, with the “RHYTHM 4”
setting producing the most accurate
rhythmic feel.
Specifies whether the sound quality or rhythmic feel of the
time-stretched sample will be emphasized.
5AUDITION......................................................................[F2]
Plays the specified sample.
Plays the time-stretched sample if pressed after [F4] (DO!) is
pressed to stretch the sample.
6DO!................................................................................... [F4]
Executes the job.
7CREATE......................................................................... [F3]
Saves the processed sample to the target sample number,
overwriting the original sample. If the original sample is a
Pitched Sample it will be overwritten at this point.
If the original sample is part of a Sample Kit Voice a key-
number selection page will appear.
8CREATE TO
(Destination Key Number)........................... [Knob 2]
[Settings] C-2 ~ G8
Specifies the key number to which the processed sample will
be saved.
9OK.....................................................................................[F3]
Saves the time-stretched sample to the specified destination
key number.
Changes the pitch of the sample without changing the length.
The sound quality of some samples may change.
1SAMPLE (Sample Number).......................... [Knob 1]
[Settings] 001 ~ 128, C001 ~ C128
Specifies the sample voice to be pitch converted.
06 TIME STRETCH
NOTE
This parameter is not available when the speci-
fied sample is a Pitched Voice.
3 4 67
12
5
[Knob 1] [Knob 2] [Knob 3] [Knob 4]
[F2] [F3] [F4]
07 PITCH CONVERT
98
[Knob 2] [F3]
36
4
7
12
5
[Knob 1] [Knob 2] [Knob 3] [Knob 4]
[F2] [F3] [F4]