4. The Sample Jobs
RS7000 253
5
The Sampling Mode
2KEY (Key Number)............................................[Knob 2]
[Settings] C-2 ~ G8
Specifies the key number of the sample to be sliced.
3AUDITION.......................................................................[F2]
Plays the specified sample.
4DO!....................................................................................[F4]
Selects the sample to be sliced and moves to the next page.
5MEAS (Measure).................................................[Knob 1]
6METER.....................................................................[Knob 1]
7SUB DIVIDE...........................................................[Knob 3]
8SLICE TYPE..........................................................[Knob 4]
9SENS (Slice Sensitivity)
0DO!
For the details of each parameter, refer to the slice page (Page
235) of the sampling mode.
ACREATE..........................................................................[F3]
If the original sample voice is a pitched voice, it will be saved
at this point by overwriting.
If the original sample voice is a sample kit voice, a page will
appear allowing you to select the track.
0CREATE TO.............................................................[Knob 2]
[Settings] TR01 ~ TR16
Specifies the track to which the sliced sample and note data
will be saved.
AOK.....................................................................................[F3]
Saves the sliced sample and note data to the specified desti-
nation track.
Allows a name to be entered for the selected sample voice.
1SAMPLE (Sample Number).......................... [Knob 1]
[Settings] 001 ~ 128, C001 ~ C128
Specifies the sample voice to be named.
2NAME ← →...........................................................[Knob 3]
Enters a name of up to 8 characters for the sample voice.
Use [Knob 3] to move the cursor, and the keyboard to enter
the corresponding character at the selected character location.
Refer to “Chapter 1: Basics”, page 67, for more information
on name entry.
3DO!................................................................................... [F4]
Enters the sample voice name.
NOTE
This parameter is not available when the speci-
fied sample is a Pitched Voice.
The Slice Parameter Page
=
A
56
78
9
[Knob 1]
[Knob 3] [Knob 3]
[F3]
NOTE
See page 237 for information on the amount of
free memory required for slice operations.
13 SAMPLE VOICE NAME
A=
[Knob 2] [F3]
2 31
[Knob 1] [Knob 3] [F4]