13. The Song Jobs
RS7000 221
4
The Song Mode
1Delete Range
[Settings] 001 ~ 999
Specifies the range of measures to be deleted.
Copies all data from a specified source track to the specified des-
tination track.
1Source Song
[Settings] 01 ~ 20
Selects the source song.
2Source Track
[Settings] 01 ~ 16
Selects the source track.
3Destination Song
[Settings] 01 ~ 20
Selects the destination song.
4Destination Track
[Settings] 01 ~ 16
Selects the destination track.
5Data Type
[Settings]
SEQ EVENT
All events in the track.
PLAY FX/GROOVE/MIDI DELAY
The track’s PLAY FX. GROOVE, and MIDI DELAY set-
tings.
MIXER/VOICE EDIT
The track’s mixer and voice edit settings.
SAMPLE
Sample voices selected by Voice Select.
Determine the type(s) of data to be copied. When a checkbox
is checked the corresponding data type will be copied.
Exchanges the specified type of data between two specified
tracks in the current style and section.
NOTE
•Measure and meter data following the deleted
measures are moved backward accordingly.
•When sample voices are used in the deleted
measures, the note events which trigger the
sample voice will be erased so that the sam-
ple voice does not sound, but the sample
voice itself is not erased.
20 Copy Track
CAUTION
The copy operation overwrites any data previously
existing on the destination track.
1
[Knob 2] [Knob 3] [F4]
21
5
43
[Knob 2] [Knob 3] [F4]
NOTE
•When there is no memory available in the
destination song for local sample voice data,
“Too Many Local Sample Voices” will appear
on the display and the sample voice data will
not be copied. If this occurs, use Sample Job
“02 Delete” (Page 246) to delete unused local
samples then try again.
•Undo/Redo (Page 213) cannot be used to
undo/redo a sample voice copy operation.
•When the “Sample” box is checked and the
[F4] (DO!) button is pressed, the “Are You
Sure? Cancel [F2]/OK [F3]” confirmation
prompt will appear. [F3] will execute the Copy
Track job.
21 Exchange Track
1
3
2
[Knob 2] [Knob 3] [F4]