Yamaha RS7000 - page 234

1. Recording Samples (Sampling)

234 RS7000

[STANDBY/START/STOP] → [F4] or [STANDBY/START/STOP]

→ [STANDBY/START/STOP]

From this display sampling will begin according to the following

conditions:

• If TRIGGER MODE = LEVEL … Sampling will begin auto-

matically as soon as the input signal exceeds the speciﬁed trig-

ger level.

• If TRIGGER MODE = MEASURE … Press [STANDBY/

START/STOP] after pressing [PLAY] from the Sampling

Standby page to start sequence playback. Sampling will begin

automatically at the speciﬁed punch-in measure.

The Sampling Execution Page will appear when sampling begins.

This display appears during sampling.

From this display sampling will end according to the following

conditions:

• If TRIGGER MODE = MANUAL or LEVEL … Sampling

will end as soon as the [STANDBY/START/STOP] button is

pressed. If sequencer playback started automatically when

sampling was started, pressing the [STOP] button to stop play-

back will also end sampling. Sampling will also end if the pat-

tern or sequence plays all the way through to the end and stops

automatically.

• If TRIGGER MODE = MEASURE … Sampling will end auto-

matically when the speciﬁed punch-out measure is reached. Or

sampling will end if the [STANDBY/START/STOP] button is

pressed.

The Trim page will appear when sampling ends and the SLICE +

SEQ sampling type is selected.

The trim function makes it possible to specify the beginning and

end points of a measure within a sample to allow appropriate slic-

ing. Data prior to the speciﬁed beginning of the measure and data

after the speciﬁed end of the measure will be deleted, thus reduc-

ing the overall data size.

The Trim page is automatically selected after sampling when the

SLICE+SEQ sample type is selected.

1NORMALIZE.........................................................[Knob 1]

[Settings] OFF, ON

OFF...................No normalization.

ON.....................The sample will be normalized.

Normalization achieves the highest possible sample level by

finding the highest level in the target sample and increasing

the overall sample level so that the peak level is just below

clipping. This function is used to increase the sound quality

of recorded samples.

NOTE

When the TRIGGER MODE is set to MANUAL

sampling will begin as soon as the [STANDBY/

START/STOP] button is pressed.

Sampling Execution Page

Trim Page

NOTE

To ensure proper slicing the sample should be

trimmed so that it loops cleanly. Loop playback

begins when the [F2] (AUDITION) button is

pressed, making it easy to hear even slight

changes in the sample length.

NOTE

Since slicing divides a sample into multiple seg-

ments, normalization while maintaining the

overall level relationship between the divided

samples is not possible after slicing. When nor-

malization is necessary it should be applied

before slicing.

534216

[Knob 2] [Knob 3] [Knob 4]

[Knob 1] [F2] [F4]

Normalize